Circuit Schematic 500W Power Inverter using SG3526-IRFP540

Inverter. - Here is electronic Circuit Schematic 500W Power Inverter using SG3526-IRFP540 like in Figure 1 below. In this circuit schematic the basic component used are SG3526-IRFP540. 

In here we will give you global description about Circuit Schematic 500W Power Inverter using SG3526-IRFP540 circuit and then we will give you link to continue your reading from original source as external website.

Circuit Schematic

Component Part

The parts you will need
Resistor (0.25W 1% Except where indicated)
R1______________15K_______________ = 1 pcs.
R2______________22K_______________ = 1 pcs.
R3______________2.7K_______________ = 1 pcs.
R4______________10K_______________ = 1 pcs.
R5______________12K_______________ = 1 pcs.
R6______________4.7K_______________ = 1 pcs.
R7______________47K_______________ = 1 pcs.
R8,R22,R23______0.01 ohms / 5W ______ = 3 pcs.
R9______________1K (PTC)___________ = 1 pcs.
R10_____________ 8.2 ohms___________ = 1 pcs.
R11______________16.9K______________ = 1 pcs.
R12______________33 ohms____________ = 1 pcs.
R13,R15, R18- R21_ 22 ohms___________ = 6 pcs.
R14______________ 18 ohms___________ = 1 pcs.
R16______________ 1K ________________ = 1 pcs.
R17______________ 470 ohms___________ = 1 pcs.

Capacitors
C1,C2____________220uF 16V____Electrolytic____= 2 pcs.
C3,C7,C9,C10_____220nF 50V____Polyester_____= 4 pcs.
C4______________1uF 50V________Electrolytic____= 1 pcs.
C5,C6___________33nF 50V_______ Polyester_____= 4 pcs.
C8___________2.2 uF 50V_______ Polyester_____= 1 pcs.

Semiconductors
D2__________1N4148_____75V 150mA Diodes__= 1 pcs.
D2__________1N4002_____100V 1A Diodes__= 1 pcs.
D4__________18V 1W_____Zener Diodes___= 1 pcs.
D5,D6_______BY299______Didoes__________= 2 pcs.
IC1_________LM393N____op-amp IC________= 1 pcs.
IC2_________SG3526N or SG2526N IC______ = 1 pcs.
Q1-Q6______IRFP540 mosfet______________ = 6 pcs.
D1_________LED 3 mm red or as you need____ = 1 pcs.

Other parts
T1________220V / 12V-0-12V / 40A transformer__ = 1 pcs.

PCBs,Heat sink, wires and others.

Description

Circuit schematic like in Figure 1 above is Circuit Schematic 500W Power Inverter using SG3526-IRFP540. Eleccircuit site describe that As the 200 watt inverter, Many people want to create a project of large power inverter about 500 watts. In order to use the multiple appliances at the same time. And can also be used on a large bus as a bus or coach, too.

Adding a 200watt into 500 watts is simple.We use the same PCB’s, and add the power output PCB. Large transformer is 500 watts or 40A, it can apply the energy output as needed.

And now you can read more you knowledge about Circuit Schematic 500W Power Inverter using SG3526-IRFP540 from the original source article using link [here].
Share on Google Plus
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment