Circuit Schematic Simple IF Signal Generator using CMOS CD4011-CD4040 IC

Radio. - This is electronic Circuit Schematic Simple IF Signal Generator using CMOS CD4011-CD4040 IC like in Figure 1 below. In this circuit schematic the basic component used are CMOS CD4011-CD4040 IC. 

In here we will give you global description about Circuit Schematic Simple IF Signal Generator using CMOS CD4011-CD4040 IC and then we will give you link to continue your reading from original source as external website.

Circuit Schematic

Component Part
  • CD4011 IC
  • CD4040 IC
  • Resistors
  • Capacitors
  • X-Tal 3.579 MHz
Description

Circuit schematic like in Figure 1 above is Circuit Schematic Simple IF Signal Generator using CMOS CD4011-CD4040 IC. Electronic-Diy site describe that this is a Simple IF signal generator circuit using CMOS IC CD4011-CD4040 and crystal-3.579 MHz into output AM: frequency 455 KHz

In the event of AM radio repairs, basic tools that are usually found the IF signal frequency generator is used to determine the function of various sectors. Which these circuits are often used transistors, built frequency. 

The working starting at IC1/1-IC1/3, R1-R2, C1-C2 and crystal are connected as the square wave frequency generators circuit. Which has a frequency of 3.579 MHz. This frequency will out to pin 10 of IC1/3, before in to pin 12 and pin 13, then out to pin 11 of IC1/4 is finally.

And now you can read more you knowledge about Circuit Schematic Simple IF Signal Generator using CMOS CD4011-CD4040 IC from the original source article using link [here].
Share on Google Plus
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment