Circuit Schematic RF Based Wireless Remote Control System

Radio. - These are electronic Circuit Schematic RF Based Wireless Remote Control System like in Figure 1 and Figure 2 below. In these circuit schematic the basic component used are encoder IC HT12E from Holtek as RF transmitter and decoder IC HT12F from Holtek as receiver. 

In here we will give you global description about Circuit Schematic RF Based Wireless Remote Control System and then we will give you link to continue your reading from original source as external website.

Circuit Schematic

Component Part
  • Encoder IC HT12E from Holtek as RF transmitter 
  • Decoder IC HT12F from Holtek as receiver
Description

Circuit schematic like in Figure 1 above is Circuit Schematic RF Based Wireless Remote Control System. Electroschematics site describe that it is often required to switch electrical appliances from a distance without being a direct line of sight between the transmitter and receiver. As you may well know, an RF based wireless remote control system (RF Transmitter & RF Receiver) can be used to control an output load from a remote place. RF transmitter, as the name suggests, uses radio frequency to send the signals at a particular frequency and a baud rate.

The RF receiver can receive these signals only if it is configured for the pre-defined signal/data pattern. An ideal solution for this application is provided by compact transmitter and receiver modules, which operate at a frequency of 434 MHz and are available ready-made. Here, the radio frequency (RF) transmission system employs Amplitude Shift Keying (ASK) with transmitter (and receiver) operating at 434 MHz. The use of the ready-made RF module simplifies the construction of a wireless remote control system and also makes it more reliable.

And now you can read more you knowledge about Circuit Schematic RF Based Wireless Remote Control System from the original source article using link [here].
Share on Google Plus
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment