Circuit Schematic Stereo Preamplifier using LA3161 IC

Audio. - This is electronic circuit schematic of Stereo Preamplifier using LA3161 IC like in Figure 1 below. In this circuit schematic the basic component used is LA3161 IC. 

In here we will give you global description about circuit schematic of Stereo Preamplifier using LA3161 IC and then we will give you link to continue your reading from original source as external website.

Circuit Schematic

Component Part

  • LA3161 IC
  • Resistors
  • Capacitors
Description

Circuit schematic like in Figure 1 above is Circuit Schematic Stereo Preamplifier using LA3161 IC. Circuitstoday site describe that in the circuit both of the built in amplifier section are used. Capacitors C8 and C9 are input coupling capacitors. Capacitors C3 & C6 are noise filter capacitors. The lower cut-off frequency depends on the value of C3 and C6 network comprising of components R1, R2 & C1 defines the frequency characteristics of left channel and the network consisting of R3, R4 &C2 defines the frequency characteristics of the right channel. C4 and C5 are output coupling capacitors. C7 is the power supply filter capacitor and it must be connected as close as possible to the power input pin (pin 4) of the IC. This IC doesn’t have short circuit protection, and short between pins may cause damage. C10 and C11 are meant for preventing radio interference, interference from engines etc.

And now you can read more you knowledge about Circuit Schematic Stereo Preamplifier using LA3161 IC from the original source article using link [here].


Thank you for your coming here in Electronic Index blog, we hope the article above will help you to know more about your an electronic circuit schematic design and simulation and other. Please comment here when you want to share and other. Thank you.

Share on Google Plus
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment