Circuit Schematic Small Induction Heater for School Project

Induction. - This is electronic circuit schematic of Small Induction Heater for School Project like in Figure 1 below. In this circuit schematic the basic component used are NE555 IC and heater inductor. 

In here we will give you global description about circuit schematic of Small Induction Heater for School Project and then we will give you link to continue your reading from original source as external website.

Circuit Schematic

Component Part

  • NE555 IC
  • NPN Transistor
  • Resistors
  • Capacitors
  • LED
  • Diodes
  • Variable resistors
  • Heater inductor
Description

Circuit schematic like in Figure 1 above is Circuit Schematic Small Induction Heater for School Project. HomeMade-Circuit site describe that here the IC is configured as a PWM generator circuit, which is adjusted using the 5 K pot. The frequency is adjusted by tweaking the 1M pot or the 1uF capacitor specifically for achieving the optimized heating effect on the work coil.

The working coil here is made by winding around 50 turns (not critical) of 1mm super enameled copper wire over a fabricated iron pipe whose dimensions may be selected as per individual preference, and could be anywhere between 10 to 20 cm in diameter and 30 to 40 cms long.

Once the above set up is built and switched ON, the coil and the iron pipe could be seen developing heat gradually, and anything placed inside the pipe could be witnessed getting heated up.

And now you can read more you knowledge about Circuit Schematic Small Induction Heater for School Project from the original source article using link [here].


Thank you for your coming here in Electronic Index blog, we hope the article above will help you to know more about your an electronic circuit schematic design and simulation and other. Please comment here when you want to share and other. Thank you.

Share on Google Plus
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment