Circuit Schematic Walkie Talkies Automatic Charger Based on Transistor

Battery Charger. - This is electronic Circuit Schematic Walkie Talkies Automatic Charger Based on Transistor like in Figure 1 below. In this circuit schematic the basic component used are Transistor. 

In here we will give you global description about Circuit Schematic Walkie Talkies Automatic Charger Based on Transistor and then we will give you link to continue your reading from original source as external website.

Circuit Schematic

Figure 1. Circuit Schematic Walkie Talkies Automatic Charger Based on Transistor(Source: Screenshot of Eleccircuit)

Component Part

• Fuse
• Bridge diode
• Zener diode
• Capacitors
• Resistors
• LEDs
• See all component in Figure 1 above

Description

Circuit schematic like in Figure 1 above is Circuit Schematic Walkie Talkies Automatic Charger Based on Transistor. Eleccircuit site describe that this is Automatic battery charger circuit for old motorola radio. This is a small motorola radio charger circuit, for the 9 nickel-metal hydride battery holder, if the battery is charged to 11 Volts.

When apply the walkie-talkies in this circuit. The RED LED will light up to show a charging status for times about 8-10 hour, And next the battery is charged in full, then the green LED will glow up, show battery FULL mode and this is in range : “TRICKLE” it will be charging in low current about 10mA-14mA at all time.

And now you can read more you knowledge about Circuit Schematic Walkie Talkies Automatic Charger Based on Transistor from the original source article using link [here].