Circuit Schematic Ni-MH Battery Charger using LT4060

BatteryCharger. - This is electronic Circuit Schematic Ni-MH Battery Charger using LT4060 like in Figure 1 below. In this circuit schematic the basic component used is LT4060. 

In here we will give you global description about Circuit Schematic Ni-MH Battery Charger using LT4060 and then we will give you link to continue your reading from original source as external website.

Circuit Schematic

Figure 1. Circuit Schematic Ni-MH Battery Charger using LT4060 (Source: Circuitstoday)

Component Part

• NTC Thermistor
• Resistors
• LED
• Capacitor
• Transistor
• Battery
• LT4060 IC

Description

Circuit schematic like in Figure 1 above is Circuit Schematic Ni-MH Battery Charger using LT4060. Circuitstoday site describe that this is the circuit diagram of a very powerful and efficient Ni-MH battery charger using IC LT4060 from Linear Technologies. In addition to Ni-MH batteries Ni-Cd batteries can be also charged by slightly modifying the circuit.For charging Ni-Cd batteries connect the CHEM pin (pin12) of the IC to +Vcc.Here the circuit is configured to charge 2 cells connected in series. By altering the connections of SEL0 and SEL1 pins, upto 4 batteries in series can be charged using this circuit. For charging a  single cell, connect SEL0 and SEL1 pins to GND. For charging two cells, connect SEL1 to GND and SEL0 to Vcc. For charging  three cells,  connect SEL1 to VCC and SEL0 to GND. For charging 4 cells, connect SEL0 and SEL1 pins to VCC. The circuit also features temperature based charge qualification.An NTC thermistor connected at the NTC pin (pin11) of the IC serves as the temperature sensor..

And now you can read more you knowledge about Circuit Schematic Ni-MH Battery Charger using LT4060 from the original source article using link [here].