Tuesday, September 13, 2016

Circuit Schematic Modify Acoustic into the Electric Guitar on FM Wireless Transmitter

Audio. - This is electronic Circuit Schematic Modify Acoustic into the Electric Guitar on FM Wireless Transmitter like in Figure 1 below. In this circuit schematic the basic component used are oscillator and transistor. 

In here we will give you global description about Circuit Schematic Modify Acoustic into the Electric Guitar on FM Wireless Transmitter and then we will give you link to continue your reading from original source as external website.

Circuit Schematic

Component Part

  • Transistor
  • Resistor
  • Capacitor
  • Inductor
Description

Circuit schematic like in Figure 1 above is Circuit Schematic Modify Acoustic into the Electric Guitar on FM Wireless Transmitter. Eleccircuit site describe that this circuit is used to Modify an Acoustic into the electric guitar on FM wireless transmitter system. It is small, cheap, easy to build.

The acoustic guitar pickup of this circuit like working of the condenser microphone. Which is good because This system has less distortion than the general guitar pickup, that include of magnets and coils, may be hard to find and expensive.

The 88 MHz FM transmitter circuit can be listened to with the standard FM radio. This frequency is determined the value of L1 and capacitance between the plate-P1 and guitar strings that is connected to ground through crimping terminal,the capacitance is about 5 pF..

And now you can read more you knowledge about Circuit Schematic Modify Acoustic into the Electric Guitar on FM Wireless Transmitter from the original source article using link [here].

No comments:

Post a Comment