Circuit Schematic Motor Bike Brake Horn using Transistors

Alarm. - This is electronic circuit schematic of Motor Bike Brake Horn using Transistors like in Figure 1 below. In this circuit schematic the basic component used are transistors. 

In here we will give you global description about Motor Bike Brake Horn using Transistors and then we will give you link to continue your reading from original source as external website.

Circuit Schematic

Figure 1. Circuit Schematic Motor Bike Brake Horn using Transistors (Source: Electronicsproject)

Component Part

• R1, R7 = 2.2 KΩ
• R2, R4 = 820 Ω
• R3, R5 = 470 Ω
• R6 = 4.7 KΩ
• R8 = 10 KΩ
• R9 = 4.7 Ω, 0.5W
• Capacitors
• C1 = 22 µF/25v
• C2 = 4.7 µF/63V
• C3 = 100v/16V
• C4 = 0.047 µF
• C5 = 0.01 µF
• Semiconductors
• T1 – T4 = BC148B
• T5 = SL100
• Miscellaneous
• LS1 = 4Ω speaker

Description

Circuit schematic like in Figure 1 above is Circuit Schematic Motor Bike Brake Horn using Transistors. Electronicsproject site describe that the circuit can be operated from 4.5V to 12V DC or direct from the brake point of the motor-bike, Resistor R7 should be replaced with 1-ohm. 1/2W in case of an 8-ohm speaker. T5 is a driver transistor. C3 polarity can be reversed for a sudden off of the circuit.

And now you can read more you knowledge about Circuit Schematic Motor Bike Brake Horn using Transistors from the original source article using link [here].

Thank you for your coming here in Electronic Index blog, we hope the article above will help you to know more about your an electronic circuit schematic design and simulation and other. Please comment here when you want to share and other. Thank you.

Share on Google Plus